Crestron TSW-70 Series User Manual

Product Manual — Doc. 8550E TSW-70 Series • 97
2. Create an opening in the surface by tracing the cutout opening with an appropriate
drywall saw.
3. Loosen the two screws on the TSW-UMB-70 mounting bracket.
4. Install the TSW-UMB-70, bottom side first, into the opening.
5. Push the rear half of the mounting bracket back so that it is seated behind the mounting
surface completely.
6. Ensure the front of the TSW-UMB-70 is level, and then tighten the two bracket screws.

Crestron TSW-70 Series Specifications

General

Brand	Crestron
Model	TSW-70 Series
Category	Touch Panel
Language	English