o CNC program is analyzed in advance, so it allows for optimal adjustment of motion
speed at every point of trajectory - programs are completed quickly with full
smoothness of the motion.
The CS-Lab company is an authorized distributor of the Mach3 program in Poland. If you would like to buy
the license, please contact us:
biuro@cs-lab.eu.
If you order the CSMIO/IP-M controller and you want to order the license right away, please note it in your
order and specify person/company, the license should be issued to.
Please note that the Mach3 program is only to operate the machine - it is not possible to design, draw, etc.
However, there are functions that allow for generating the CNC G-code for simple operations, but it is
better to use a CAM program such as ArtCam, MasterCam etc.
CS- Lab s.c. – CNC CSMIO/IP- M controller
Page 30
To Next Page
Loading...