9.4 Administrator rights in Windows® Vista and Windows® 7.
It is recommended to launch the Mach3 program in OS
Windows® Vista and 7 with an administrator rights.
Open the „C:\Mach3” directory, find the Mach3.exe file
and click right mouse button. In the menu select the
“Properties” position, and next in the window select the
„Compatibility” tab.
Next, select the „Launch this program as administrator”
and click „OK”.
From now, the Mach3 program will always run with the
administrator rights.
CS- Lab s.c. – CNC CSMIO/IP- M controller
Page 34
To Next Page
Loading...