8. Mach3 program – general information
Mach3 software from the ArtSoft® Company has been developed over many years and during these years,
it gathered many users. For relatively low price (~170USD) we get a complete solution for multi-axis CNC
machining. Key benefits of the program are:
• Flexibility
o Ability to create custom user interfaces, transparent and suited to specific machine
applications. There is a special visual editor where you can create a Mach3 interface
design from the beginning or use an existing project. On the internet, there are many
ready solutions. Below – one of the more visually attractive interfaces available on
www.machmotion.com.
o Ability to self-extend the functionality of the program through macros, written in
simple and known by many users - VisualBasic®. This allows you to implement a
variety of measurement probes, automatic tool length measurement, automatic
storage of tools in many variants etc.
o Plug-ins support, which further extend functions of the program and allows for
cooperation with outside motion controllers. Connection with the CSMIO/IP-M
controller is made by a plug-in written by our company.
• Easy to use
o Those who are already somewhat familiar with CNC machines are able to learn all
the general functions and rules for using the Mach3 program – usually within one
day.
o Configuration of the key parameters is transparent and intuitive, so they can be
quickly adjusted to the requirements of a specific machine.
• Dynamic analysis of the trajectory
CS- Lab s.c. – CNC CSMIO/IP- M controller
Page 29
To Next Page
Loading...