EasyManua.ls Logo

CTC Union FMUX04 - E1 Link Technical Specifications; T1 Link Technical Specifications

CTC Union FMUX04
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 1: Introduction
11
1.5 Technical Specifications
1.5.1 E1 Link
Ports 4 fixed ports
Framing Unframed (transparent)
Bit Rate 2.048 Mb/s +/-50ppm
Line Code AMI
HDB3
Line Impedance Unbalanced 75 ohms (BNC)
Balanced 120 ohms (RJ-45)
Receiver sensitivity -43dB (long haul)
"Pulse" Amplitude Nominal 2.37V+/-10% for 75 ohms
Nominal 3.00V+/-10% for 120 ohms
"Zero" Amplitude +/-0.1V
Transmit Frequency Tracking
Recovery Timing
+/-50 ppm
Jitter Performance According to ITU-T G.823
Complies With ITU-T G.703 and G.823
Interface Connectors RJ-45 120 ohm (USOC RJ-48C)
BNC 75 ohm
Test Loops LLB (Local Loop Back)
RLB (Remote Loop Back)
RRLB (Request Remote Loop Back)
1.5.2 T1 Link
Ports 4 fixed ports
Framing Unframed (transparent)
Bit Rate 1.544 Mb/s +/-50ppm
Line Code AMI
B8ZS
Line Impedance Balanced 100 ohms (RJ-45)
Receiver sensitivity -36dB (long haul)
"Pulse" Amplitude Nominal 3.00V+/-20% for 100 ohms
"Zero" Amplitude +/-0.15V
Transmit Frequency Tracking
Recovery Timing
+/-50 ppm
Jitter Performance According to ITU-T G.824
Complies With ITU-T G.703 and G.824
Interface Connectors RJ-45 100 ohm (USOC RJ-48C)
Test Loops LLB (Local Loop Back)
RLB (Remote Loop Back)
RRLB (Request Remote Loop Back)

Table of Contents