Chapter 4. SNMP
4.8.13 Display Information
The Display Information page is where the current versions for main firmware, FPGA and
SNMP can be displayed. (refer to 3.5.4)
This completes the review of the Web based management features of the FMUX04.
4.9 Telnet Management
When the SNMP option is installed in the FMUX04, Telnet connection is available for
console type management. Choosing a Telnet client is important to get the proper display
from the SNMP agent. Clients that we have found work well are Telnet in command window
for Win98, WinME, WinNT and Win2000. HyperTerminal in TCP/IP mode works well for
all versions of Windows®.
Clients which we have found experience some difficulties with the agent are command mode
Telnet in WinXP, Telnet from Linux or FreeBSD and Windows packages such as Putty. In
command mode of WinXP, the terminal characters are echoed locally on screen, including
the password as it is typed. In Linux, FreeBSD, and Putty, an Enter key must be pressed after
every single keystroke, and again the characters are echoed.
When setting up HyperTerminal for Telnet, choose the connection as 'Winsock' or 'TCP/IP',
and then connect with the agent's IP address. The following page has a screen capture of
Telnet session in HyperTerminal.
54
To Next Page
Loading...
Need help?
General