Cub Cadet SC2450 - Check and Adjust Brakes, Seat Belt, and ROPS

14-16
14. PERIODIC SERVICE
Sc2450 Operator’s Manual
■ Check and Adjust the Brake
●Before checking the brake pedal, park the
tractor safely on solid, level ground, stop the
engine and remove the key from the starter key
switch.
Check if the play of the brake is between 0.8 and 1.2
in. (20 and 30 mm).
If not, contact your local Cub Cadet dealer for
technical assistance.
(a) 0.8 to 1.2 in. (20 to 30 mm)
■ Check the Seat Belt and Roll-Over Protective Structure (ROPS)
1. Before operating the tractor, always make sure
that the seat belt and Roll-Over Protective
Structure (ROPS) mounting hardware are in
correct working order.
2. Replace any damaged hardware.
! CAUTION
3014916e
(a)