Cub Cadet SC2450 - Engage and Disengage Cruise Control

8-9
8. OPERATION
Sc2450 Operator's Manual
■ Engage the Cruise Control
1. Depress the forward side of the forward and
reverse drive pedal until an intended travel speed
is reached.
2. Lift up the cruise control lever to engage the
cruise control feature.
3. Remove foot from the forward side of the forward
and reverse drive pedal.
4. Remove hand from the cruise control lever.
(A) Forward side of the forward and reverse drive
pedal
(B) Cruise control lever
■ Disengage the Cruise Control
1. Depress the brake pedal.
2. Step on the forward side of the forward and
reverse drive pedal and make sure the forward
and reverse pedal is unlocked.
NOTE
●The cruise control is disengaged when the operator
depresses the brake pedal.
●If the cruise control lever is not readily disengaged,
then step on the brake pedal several times.
●Also, the cruise control can be disengaged when
the operator depresses the forward side of the
forward and reverse drive pedal. Note, however,
that the reverse side of the forward and reverse
drive pedal can not be used for this purpose.
●Do not strongly step on the reverse side of the
forward and reverse drive pedal when the cruise
control is in the locked state.
3014903i
(B)
(A)