12-3
12. TIRES, WHEELS AND BALLAST
Sc2450 Operator's Manual
■ Front Ballast
To mount the front ballast, the optional front weight
hitch is required.
To improve stability and traction, add ballast
indicated in the table below. (Front End Weights)
Heavy pulling and rear mounted implements can
cause the front wheels to lift. To cope with this
situation, add ballast so that reliable steering control
is maintained and tip-over of the tractor is prevented.
Remove the ballast when no longer necessary.
NOTE
●For information about the optional front weight
hitch, contact your local Cub Cadet Yanmar dealer.
Front End Weights (Option)
The front end weights can be mounted to the optional
front weight hitch. For the appropriate number of
weights, see the table below as reference only.
For accurate number of front weight, contact your
local Cub Cadet Yanmar dealer.
NOTE
●One (1) weight = 44 lb. (20 kg)
(A) Front end weights (option)
(B) Front weight hitch (option)
●NEVER overload the tires. (Maximum front axle
load (Right + left): 1570 lb. (712 kg))
●NEVER add weight in excess of the limits
indicated below.
Maximum Weight
●NEVER overload the tires.
●NEVER add weight in excess of the limits
indicated below.
Maximum weight: 176 lb. (80 kg) (44 lb. × 4 pcs)
2. Ballast
Implement Name Number of Weight
42" Rotary Tiller 0
48" Box Scraper 0
60" Rear Blade 0
48" Grooming Mower 4
Post hole digger 0
3013715
(A)
(B)
! WARNING! WARNING
! WARNING! WARNING
To Next Page
Loading...
