Cub Cadet SC2450 - Lower Implements and Set Throttle

7-7
7. OPERATE THE ENGINE
Sc2450 Operator's Manual
8. If the tractor has any implements that
use the implement control lever, lower
them to the ground. Then, set the
implement control lever to the
NEUTRAL position and push in the
implement lock lever to lock.
(A) Implement control lever
(B) Implement lock lever
(a) Lower the implement to the ground
9. Set the throttle control lever about
halfway.
(A) Throttle control lever
(a) To increase the engine speed, pull the throttle
control lever backward.
(b) To decrease the engine speed, push the throttle
control lever forward.
10.Insert the key into the starter key hole
and turn the key to the ON position.
(A) ON position
3014903d
(B)
(A)
(a)
3014903e
(A)
(b)
(a)
3014907a
(A)