Operations | JetSort
®
2000 series | 15
4. Press SAVE to permanently save the new limit.
5. Enter a two-digit number between 03 and 99 that has not been previously assigned.
Press PJS. Note: The new limit must not be lower than the amount of coin already processed
into the box or higher than the capacity of the container.
Clear Boxes
Coins accumulate until a box limit is reached. Container limits are set via the Stop Limits:
Programmable Jet Stop (PJS) Limits feature of the Setup menu.
JetSort box totals may be cleared when individual box-stop limits are reached, at any time
before limits are reached or if desired, all at one time.
Clear Box as Limit is Reached
When a box or bag has reached its stop limit, JetSort stops processing coin and flashes a limit
message on the display screen. The limit message displays the denomination that has reached
its limit. In the following example, the 25¢ box has reached 502 coins (two coins more than
the 500 coin limit).
1. To clear the box, press CLEAR. The number in the upper right-hand screen indicates
the number of coins over the stop limit. These coins must be removed from the box and
moved to the new, replacement box.
2. Transfer the overage (number of coins in the upper right-hand screen) to the new box.
3. Press CLEAR.
4. Press CONT to continue coin sorting.
To Next Page
Loading...
