CUMMINS ALLISON JetSort 2000 - Set Specific Denomination to Box;Bag; Declared Balance

Setup | JetSort
®
2000 series | 23
Set Specific Denomination to Box/Bag
1. Press MODE/COIN to move the cursor to the bottom menu line.
2. Press < or > to scroll forward to the desired denomination: 1¢, 5¢ or 10¢.
3. Press CONT to change the specific denomination to Box or Bag.
 1¢
5¢
10¢
Box
Bag
Box
4. Press MODE/COIN to move cursor to the top menu line.
5. Press > to scroll forward to the next set of denominations and repeat steps one through
three.
 25c
50c
$1
Bag
Box
Box
Declared Balance
The Declared Balance menu allows the declared value to be compared to actual value at the
end of each batch or sub-batch.
If the declared batch/sub-batch is set to Yes, each user is prompted to enter a declared value
while processing coin. For more information about using declared balances, see HOW TO
USE/Declared Balance.
1. To set the declared-balance feature to Yes (enabled) or No (disabled), press
MODE/COIN to move the cursor to the bottom menu line.
2. Press < or > to scroll forward to the desired selection: BAT (batch) and/or S/B (sub-
batch).
3. Press CONT to select Yes or No.
 DBal
BAT
S/B
Yes
No