CUMMINS ALLISON JetSort 2000 - Entering Labels; Entering Declared Balance

Operations | JetSort
®
2000 series | 9
Entering Labels
Labels may be entered to identify origination or processing information, such as route
numbers, bag numbers or customer IDs. If Labels A, B, C or D are enable in Setup, an entry is
required during batch processing.
1. When prompted, enter the desired label on the numeric keypad. As many as 12
characters may be entered, including the dash (SAVE/-).
2. Press RECPT/ENTER.
444-21
LABEL A ?
Entering Declared Balance
The Declared Balance feature allows a user to key in an expected amount for a batch or sub-
batch for comparison to the actual processed amount.
If Declared Balance is set to Yes, the declared balance display automatically prompts the user
to enter an amount on the numeric keypad.
$
0.00
BAT
DECL. BAL ?
1. Enter the declared balance for the batch or sub-batch using the numeric keypad and
then press RCPT/ENTER.
2. When coin processing is completed, press END to end the batch.
In order to use Labels, the feature must be enabled through Setup.
In order to use the Declared Balance feature for the batch and sub-batch, the
feature must be enabled through Setup.