CUMMINS ALLISON JetSort 2000 - Table Error Recovery; Reconcile Batch

38 | JetSort
®
2000 series | Reference
Table error recovery
Sorting Halted
TABLE ERROR
1. Remove the inspection tray and, using a non-metallic tool, clear all loose coin from sort
disk area.
2. Press CLEAR to clear the error.
3. The message “SENSORS CLEARED, Verify or Cont” will appear.
4. . To continue transaction, press CONT.
5. If verification of processed coin is necessary, press the Verify key and follow the
instructions under Reconcile Batch.
Reconcile batch
1. To verify the transaction after a jam, empty all coin from all boxes/bags into inspection
tray.
2. Press VERIFY to begin sorting coin.
3. Press [RED KEY] or wait for process to timeout. Record the amount.
4. Press VERIFY a second time. Display returns to current operating condition.
5. Press END to end the current batch or START S/BAT for the next transaction.
$
322.25
CONT. SORT BATCH
$
723.41
RECONCILE
$
723.41
RECON WAITING
$
322.25
BATCH WAITING