CUMMINS ALLISON JetSort 2000 - Communication Ports

Setup | JetSort
®
2000 series | 35
Communication Report/Data Transmission (Optional)
Data from the JetSort is sent to the computer in the form of a report. There are two different
modes to which the JetSort can be programmed.
Data Transmission
Description
Normal
Standard computer protocol will be generated.
Wedge
The machine interfaces to the Cummins Allison Software Wedge.
1. Press MODE/COIN to move the cursor to the bottom menu line.
2. Press CONT to select Normal or Wedge.
 Comm Report
Normal
Brake Setting
The Brake Setting cannot be changed.
Communication Ports
JetSort has four communication ports for peripherals such as remote display, printer,
computer, bar-code reader, JetScan
™
or JetCount
®
. In order to connect a peripheral device to
the JetSort, select the appropriate data transmission functions, such as baud rate, stop bits and
parity. For more information, contact your local Cummins Allison Representative.
Device Options
Description
Prt
Printer
Co
Computer
Bcr
Bar-code reader
JtS
JetScan
™
currency scanner
JtC
JetCount
®
currency scanner
Rmt
Remote display – available on Port 1