CUMMINS ALLISON JetSort 2000 - Sorting Batches and Sub-Batches; Start Batch

Operations | JetSort
®
2000 series | 7
Sorting Batches and Sub-Batches
Once a batch is started, JetSort my display prompts for additional information. The specific
prompts are determined through setup selections. These prompts may include date, label,
declared balance or additional media, including notes or checks. When processing a batch,
these prompts may be skipped by pressing RCPT/ENTER.
Start Batch
1. From the Batch Ended condition, press START BATCH.
$
0.00
SORT BATCH
2. Pour coin from inspection tray into sorting chamber.
3. When coin processing is complete, press [RED KEY] to stop or allow the sort disk to
stop on its own (timeout).
$
166.55
BATCH WAITING
4. To continue adding coin to the batch, press CONT and process the remaining coins. To
end the batch, press END.
$
1389.34
CONT.
SORT BATCH
$
9219.23
BATCH ENDED
If End is enabled in setup, the END key must be pressed twice to end a batch.