Setup | JetSort
®
2000 series | 29
Prime and Check Oiler
The Shot and Prime features are used for initial auto oiler setup. Shot dispenses one drop of oil
onto the sort head.
1. Press MODE/COIN to move the cursor to the bottom menu line.
2. Press CONT to select On to dispense one drop of oil onto the sort head. Wipe off any
excess oil with a soft cotton cloth and discard the cloth when finished.
Prime ensures that oil is correctly running through the oiler hose and that air pockets are
removed from the oil tube.
3. Press < or > to scroll forward to Prime.
4. Press CONT to select On.
Print Format 1
JetSort reports are generated to match user-selected features and configurations. The report
modes listed below are based on standard options; actual reports may vary, depending on
which options are selected in Setup.
Print Mode 1
Includes date; randomly-assigned audit number, sequential batch and sub-
batch numbers; custom labels, ID, coin units and total (not by denomination),
media totals; and declared balances (with over/short amount).
Print Mode 2
Includes Print Mode 1 items plus coin units and totals by denomination for
batches and sub-batches.
Print Mode 3
Includes randomly-assigned audit number; sequential batch and sub-batch
numbers; and total amount processed.
Print Mode 4
Includes total processed value.
To Next Page
Loading...
