CUMMINS ALLISON JetSort 2000 - Safety Information and Power Specifications; Environmental Operating Conditions

Safety information, power specifications
•
Voltage operating range:
105-130 VAC
•
Frequency:
50-60 Hz
•
Full load amps (FLA):
6A
•
Electrical supply circuit:
The customer must provide a single-phase, dedicated power line that meets the
machine’s power requirements. Use a properly grounded circuit breaker in compliance with applicable local
electrical code.
Environmental operating conditions
•
Temperature:
60°F - 85°F (15°C - 29°C)
•
Humidity:
30% to 70% (non-condensing)
Compliance acknowledgments
•
Laser:
This equipment may contain Class 2 laser products and complies with FDA Radiation Performance
Standards, 21 CFR Subchapter 1 and the international laser safety standard IEC-60825.1-2001-08.
•
FCC:
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
•
Regulatory:
FCC, CE
High voltage inside. Risk of electric shock.
Turn power
OFF
and unplug power cord from machine before cleaning.
Do not defeat safety interlock switches.
Do not attempt repairs. Repairs must be made by authorized Cummins Allison personnel.
Plug three-prong grounded plug (supplied) into properly grounded three-prong outlet.
Read and understand all instructions before use.
Sort disk rotates when motor is running. Risk of injury.
Do not defeat safety interlock switches.
Improper voltage levels can cause equipment malfunction, damage electrical components, and void
warranty.
Provide separate circuit serving only this device and follow listed power requirements to ensure
proper operation.
Provide power conditioning/stabilizing devices if necessary.