22 | JetSort
®
2000 series | Setup
Setup
Access Setup Menu
1. Turn the power switch off (power switch is located on the back of the machine next to
the power cord).
2. Press and hold START BATCH.
3. Turn the power switch on.
Machine Type
Machine Type menu configures JetSort for the correct coin collection. The selection in this
screen also sets the default setting for the Box/Bag menu. Box and bag settings for each
denomination may also be independently set as shown in SETUP/Set Specific Denominations
to Box or Bag.
1. To configure box or bag, press MODE/COIN to move the cursor to the bottom menu
line.
2. Press CONT to choose between a Box or Bag model.
Stop Limits
The Stop Limits menu sets the box- and bag-stop limits to Full (full boxes or full Federal
bags), Half (half boxes or half Federal bags) or Infinity (no limit).
1. To configure stop limits, press MODE/COIN to move the cursor to the bottom menu
line.
2. Press CONT to choose Full , Half or Infinity.
Setup menu screens are sequential. To set or change a programmed feature,
press
or
to scroll through the menu selections until the desired feature
menu is reached.
Once the desired feature is modified, press
to return to the menu
selections. Press
or
to scroll through remaining features or turn the JetSort
off to exit.
To Next Page
Loading...
