36 | JetSort
®
2000 series | Setup
To change port configurations for Port 1, Port 2, Port 3 or Port 4:
1. Press MODE/COIN to move the cursor to the bottom menu line.
2. Press CONT to select device: Prt, Co, Bcr, JtS, JtC Rmt or Off.
3. Press > to scroll forward to Baud Rate.
4. Select rate to coincide with how baud rate is set on the connected device: 600, 1200,
2400, 4800 or 9600.
5. Press > to move to Stop Bits and Parity.
6. Select stop bits and parity to coincide with how they are set on the connected device:
7, Odd; 7, Evn; 7, NP; 8, Odd; 8, Evn; or 8, NP.
To Next Page
Loading...
