Curtis 1239E - CAN STATUS MENU

Return to TOC Curtis 1239E-1269E Manual, os 37.0 RevA – May 2021
5 — MONITOR MENU
pg. 81
Monitor Menu: CONTROLLER
VARIABLE DISPLAY RANGE DESCRIPTION
Current (RMS)
Current_RMS
0x3209 0x00
0.0 – 1000.0 A
0 – 10000
RMS current of the controller, taking all three phases into account.
Modulation Depth
Modulation_Depth
0x3208 0x00
0.0 – 100.0%
0 – 1182
Percentage of available voltage being used.
Frequency
Frequency
0x3206 0x00
–1000.0 – 1000.0 Hz
–3000 – 3000
Controller electrical frequency.
This parameter has scaling changes to support higher frequencies.
Temperature
Controller_Temperature
0x322A 0x00
–100 – 300°C
–1000 – 3000
Controller internal temperature.
Main State
Main_State
0x3223 0x00
0 – 10
0 – 10
Main contactor state:
0 = open
1 = precharge
2 = weld check
3 = closing delay
4 = missing check
5 = closed (when Main Enable = On)
6 = delay
7 = arc check
8 = open delay
9 = fault
10= closed (when Main Enable = Off).
EMBrake State
EMBrakeState
0x3892 0x00
0 – 4
0 – 4
EM brake state:
0 = engaged
1 = releasing
2 = released
3 = engaging
4 = engaged and vehicle stopped.
EMBrake Test State
EM_Brake_Test_State
0x30E8 0x00
0 – 4
0 – 4
The current state of the EM brake test. Can be stop (0), starting (1), running
(2), done (3), or failed (4).
Regen
|Regen_State
|System_Flags1 [Bit 2]
0x322B 0x00
On / Off
On / Off
On when regen braking is taking place; Off when it is not.
KSI Hour Meter
KSI_Hour_Meter
0x3160 0x00
0 – 429496729.5 s
O – 4294967295
The KSI Hour Meter is a timer of the total hours the controller is powered on
(keyswitch hours). The meter (timer) is controlled by the OS software and
cannot be reset.
VCL Error Module
Last_VCL_Error_Module
0x3473 0x00
0 – 65535
0 – 65535
A VCL Runtime Error (fault code 68) will store additional information about
the cause of a VCL runtime error in the VCL Error Module and VCL Error
variables. The resulting non-zero values can be compared to the runtime
VCL module ID and error code denitions listed in the controller’s OS
SysInfo le, which should help pinpoint the VCL error that caused the
runtime error.
VCL Error
Last_VCL_Error
0x3472 0x00
0 – 65535
0 – 65535