Custom Audio Electronics VKP80III - Page 91

Printing head
Disconnect the power supply cable and
open the device cover (see paragraph 5.1).
Clean the printing head by using
a non-abrasive cloth moistened with isopropyl.
ISOPROPYL ALCOHOL
ATTENTION:
Do not use solvents, or hard brushes.
Do not let water or other liquids get inside the machine.
ON
1
2
Disconnect the power supply cable and
open the device cover (see paragraph 5.1).
Platen roller
Disconnect the power supply cable and
open the device cover (see paragraph 5.1).
Clean the dragging roller
and the ejector roller by using
a non-abrasive cloth moistened with isopropyl.
ISOPROPYL ALCOHOL
ATTENTION:
Do not use solvents, or hard brushes.
Do not let water or other liquids get inside the machine.
ON
1
2
Disconnect the power supply cable and
open the device cover (see paragraph 5.1).
91