Case
Disconnect the
power supply cable.
To clean the device,
use compressed air or a soft cloth.
ATTENTION:
Do not use alcohol, solvents, or hard brushes.
Do not let water or other liquids get inside the machine.
ON
Alcohol, solvent
1
2
Autocutter
Disconnect the power supply cable and
open the device cover (see paragraph 5.1).
Clean the autocutter by
using compressed air.
ATTENTION:
Do not use alcohol, solvents, or hard brushes.
Do not let water or other liquids get inside the machine.
ON
Alcohol, solvent
1
2
Disconnect the power supply cable and
open the device cover (see paragraph 5.1).
92
To Next Page
Loading...
