6/38
• EN English.
• CN 中文.
• CZ Český.
• DE Deutsch.
• ES Español.
• FR Français.
• IT Italiano.
• NL Nederlands.
• PL Polski.
• PT Português.
• RU Pусский.
• TR Türkçe.
• TW 台灣.
CybTouch 8 P User Manual
Sep.
2019
V2.1
Language
To browse through the available languages, simply touch Language on the screen.
Available languages are:
The list of available languages is subject to change and may increase over time.
Show axes
position values
This function will display the axes positions on the Bend Numerical Page (see page 14).
• When set to no, the positions of the axes are displayed during the respective
movements.
• When set to yes, the positions of the axes are constantly displayed under their
respective set-point values.
Length Units
Force Units
Sigma Units
This parameter allows choosing between mm, inch and none for the length unit to be
used in the CybTouch.
This parameter allows choosing between ton, kN and tons for the force unit to be used in
the CybTouch.
This parameter allows choosing between kg/mm
2
, N/mm
2
and psi(*1000) for the sigma
unit to be used in the CybTouch.
When none is selected, the units used are millimeters.
To Next Page
Loading...
Need help?
General
