18/38
CybTouch 8 P User Manual
Sep.
2019
V2.1
copy To all funcTion
This function allows copying a defined
value to all the steps of the current
program. It appears in the numerical pad of
relevant fields, such as Force, Bending and
Corrections, etc.
Copy to all button
Crowning
The crowning function is activated here. It is automatically calculated, according to the
Material, the Material thickness, the Material sigma and the Bending length.
The value can be manually changed by operator. It will however be automatically
recalculated if any of the values used for its calculation is changed.
The mechanical crowning system can only move when the beam is at TDC.
When the crowning function is deactivated (gray icon), the crowning system
physically remains to its last position and does not automatically return to
0.0 mm. Keep that in mind when using this function – or not – between one
sequence and the following.
Material sigma
The default sigma, defined in Materials (see page 8), is automatically displayed when
changing material. It is however possible to change it simply by touching this icon. This is
also of course a part parameter.
To Next Page
Loading...
Need help?
General
