CYBELEC CybTouch 8 Series User Manual

11/38
CybTouch 8 P User Manual
Sep.
2019
V2.1
Service paGe
(Menu Button) → Other menus → Service → Service
Set Axis
Maintenance
Allows the operator to manually adjust the position of the back gauge (axis X) and the
beam (axis Y, if available).
The Maintenance page displays the hardware status of the CybTouch and lets the
operator perform different maintenance actions.
All the following actions require codes and should only be performed by
technicians or upon request of a technician.
(Menu Button) → Other menus → Service → Service → Maintenance
This function must be used with utter care and only by experienced
personnel. Wrong settings may mechanically damage the machine.
Settings are lost after indexing the machine.

CYBELEC CybTouch 8 Series Specifications

General

Brand	CYBELEC
Model	CybTouch 8 Series
Category	Industrial Equipment
Language	English