CYBELEC CybTouch 8 Series User Manual

29/38
CybTouch 8 P User Manual
Sep.
2019
V2.1
SavinG and loadinG a ProGraM
SavinG a proGraM
After creating a program, an operator can save the program in order to use it again:
1. Touch the Program number (e.g. P0).
2. Touch Save program.
3. Enter the number you wish to give to the program (e.g. 1 for P1), followed by .
4. The program is now called P1 and is saved in the CybTouch.
loadinG a proGraM
To call (load) a program:
1. Touch the Program number (e.g. P1).
2. Touch Call program.
3. Select the program to be loaded from the list (e.g. 002 for P2).
4. The selected program (P2) is then loaded into the work memory and is ready to be
used.
deleTinG a proGraM
To delete a program:
1. Touch the Program number (e.g. P1).
2. Touch Delete program.
3. Select from the list the program to be deleted.
4. Touch to confirm.

CYBELEC CybTouch 8 Series Specifications

General

Brand	CYBELEC
Model	CybTouch 8 Series
Category	Industrial Equipment
Language	English