X1-X2 Safety Factor
The safety factors offered for X1 X2 are identical to the ordinary X axis.
axis (X1 or X2) to the die is taken into account for thThe nearest
fa
e safety
ctor.
Z1-Z2 Safety Factor
An anti-collision safety factor prevents the pass and age to
modes, and the interactive message "Z1-Z2" is obt
im
ained if the positioning is
possible (see parameter 51).
ormally the origin of the Z axes is on the left of the machine when looking
t the front of the machine.
N
a
PAGE 64 USER GUIDE DNC 600S
To Next Page
Loading...
