CYBEX FT 360 User Manual

Maintenance
Page 7-4
Cybex FT 360 Functional Trainer Owner’s Manual
1. Inspect all nuts and bolts for looseness. Tighten as required.
2. Inspect all cables for wear or damage and proper tension. When
inspecting cables, run your fingers on the cable, paying particular
attention to bends in the cable and attachment points.
! WARNING: Replace all worn cables immediately. The following
conditions may indicate a worn cable:
Figure 1
• A kink in the cable. See Figure 2.
• A curled sheath. See Figure 3.
Figure 2
Figure 3
Figure 4
• “Necking”, a stretched cable sheath. See Figure 4.
Weekly Procedures
• A tear or crack in the cable sheath that exposes the cable. See Figure 1.

CYBEX FT 360 Specifications

General

Brand	CYBEX
Model	FT 360
Category	Fitness Equipment
Language	English