Cyclades AlterPath BladeManager - Page 170

5: Advanced Configuration
5-8 Alterpath BladeManager Manual
16) EST5EDT 33) Iran 50) Poland 67) right
17) Egypt 34) Israel 51) Portugal 68) zone.tab
Enter the number corresponding to your choice: 48
Current system date and time is:
Tue Jan 25 15:40:35 PST 2005
Press ENTER to accept it or specify new ones.
Enter date in MM/DD/YYYY format:
Tue Jan 25 15:40:00 PST 2005
*** Configuration changed!
*** Execute saveconf to save the new values in flash.
DATE - sets the date and date format. For example:
[root@APM_Paulo root]# date 012515402005
Tue Jan 25 15:40:00 PST 2005
SETNAMES - sets the hostname, domain name, and primary nameserver’s IP
address. For example:
[root@APM_Paulo root]# setnames
Enter the System's Hostname
(max 30 characters) [E2000]: APM_Paulo
Enter the System's Domain Name
(max 60 chars) [localdomain]:
Enter the Primary Nameserver's IP address [none]:
*** Configuration changed!
*** Execute saveconf to save the new values in flash.
SETNETWORK - sets the Ethernet subinterfaces and VLANs. The example
below configures the following devices as follows:
eth0
eth0:1
eth0:9999
eth0.2
[root@APM network]# setnetwork
Primary Ethernet IP address: (S)tatic, (N)one or
(K)eep current ? [K]: s
Enter Primary Ethernet IP address: 192.168.48.48