Cygnus 4 Operating Manual
Now the thickness measurement is
8.05 mm so the bar-graph shows a
dark green bar positioned left of the
Reference point.
Now the thickness measurement is
5.10 mm so the bar-graph shows a
red bar positioned at the Minimum
point.
Now the thickness measurement is
20.00 mm so the bar-graph shows a
red bar positioned at the Maximum
point.
Now the thickness measurement is
25.45 mm so the bar-graph shows a
red bar positioned past the Maximum
point.
This exceeds the Maximum limit so
will cause an Vibrate Alert to the
To Next Page
Loading...
