FINDING THE PROPER INTENSITY LEVEL
WARNING - Do not set the intensity until you have read this manual
and have familiarized yourself with this unit.
It is very important to set the correct intensity level on your unit before
beginning your training sessions to provide the proper level of stimulation
and avoid over-stimulating your dog. The intensity level can be changed
from the Training Screen by pressing Up on the directional keys to
increase the level and Down on the directional keys to decrease the level.
To Find the Proper Intensity Level:
1. Set the Intensity Level to the lowest level.
2. Turn the Collar unit ON and then fit it properly around your dog’s
neck (see fitting collar on pg. 32)
3. Press the Continuous button (‘C’) and check for a reaction.
Indications of your dog feeling the stimulation include outward signs
of discomfort or confusion on it’s face, ears perking up, changes in
tail movements, etc.
4. If there are no signs of your dog feeling the stimulation, increase the
Intensity Level in increments of one until your dog reacts to the
stimulation.
After your dog feels the stimulation, increase the Intensity Level by one
or two levels. This should be your dog’s ideal training level.
NOTE - Some dogs may require a higher or lower stimulation level
depending upon their individual temperament and/or size.
To Next Page
Loading...