TURNING THE SYSTEM ON/OFF
Turning the Handheld unit ON
1. Press and hold the MENU/PWR button on the handheld unit until the
D.E. Systems startup logo appears on the LCD screen.
2. Release the button to begin the startup sequence.
Turning the Handheld unit OFF
1. Press and hold the MENU/PWR button on the handheld unit the
screen goes blank.
Turning the Collar Unit ON
1. Press and hold the Power Button on the collar unit. The green LED
will light solid for approximately 3 seconds.
2. Release the Power Button when the green LED light begins to flash.
The collar unit will vibrate, indicating the unit is now ON.
Turning the Collar Unit OFF
1. Press and hold the Power Button on the collar unit. The green LED
will light solid for approximately 3 seconds.
2. Release the Power Button after the Audible Beep and the green LED
light turns off. Collar Unit is now OFF.
NOTE - When powering ON the collar unit, be sure to have the handheld
unit powered ON. During the initial startup, if the collar unit does not
establish communication with the handheld unit within 30 seconds, the
collar unit will automatically shut down.
To Next Page
Loading...