ALERTS
Your handheld unit can give alerts on the collar unit’s status (see pg. 45
for Fence). These alerts can be turned ON or OFF by highlighting and
toggling these options in the box next to the alert (see fig. 1 below).
MENU→Setup→Alerts
Warning Zone: Alerts when the collar unit enters the Warning Zone of
the Fence.
Stim Zone: Alerts when the collar unit enters the Stim Zone of the Fence.
Fence Breach: Alerts when the collar unit has left the Fence area.
Lost GPS Signal: Alerts you when the collar
unit has lost its GPS signal. Warnings and
Stimulations will be deactivated if GPS signal is
low or lost.
NOTE - Once selections have been completed,
press BACK to go back to the Setup menu or
END to return to the Training/Fence/Mark home
screen.
Fig. 1
To Next Page
Loading...