“WELCOME HOME” FENCE FEATURE
The D.E. Systems Border Patrol’s “Welcome Home
TM
” feature allows
your dog to re-enter the fence area and Safe Zone without correction,
preventing confusion to your dog and encouraging a safe return.
If your dog crosses the outer fence boundary, he will NOT receive a
correction upon re-entry. Similarly, if your dog crosses the Stim Zone, he
will NOT receive a warning upon re-entry into the Warning Zone or Safe
Zone.
NOTE - Welcome Home only applies if there is a zone breach. For
example, if your dog enters the stimulation zone, a correction will not be
applied when re-entering the warning zone. Welcome Home will be
reset once collar unit is inside the safe zone.
TESTING FENCE
WARNING - Test your Fence settings with the test light before
placing the collar unit on your dog. Use your handheld unit to
check distance and warning/stimulation being applied.
To Test Fence Center:
1. Activate Fence and navigate to Mark→FindMark. Highlight
“Fence Center” and choose Option→Goto→Enter.
2. Walk approximately 10-20 yards away from assumed center and
view direction and distance to fence center.
3. Repeat step 2 in the N, NW, W, SW, S, SE, E, NE sections of the
fence to find the approximate fence center.
To Next Page
Loading...