TESTING FENCE
To Test the Warning Zone:
1. Activate Fence and take collar slightly past the Warning Zone. The
handheld unit can be used to gauge distance.
2. Check to see if the collar unit emits the desired warning. The
handheld unit will also indicate that the collar is in the Warning Zone
3. Move back into the Safe Zone and repeat step 2 at different points of
the Fence.
To Test the Stim Zone:
1. Activate Fence and take collar slightly past the Stim Zone The
handheld unit can be used to gauge distance.
2. Check the test light to see if the collar unit emits a correction. The
handheld unit will also indicate the collar is in the Stim Zone.
3. Move back into the Warning Zone or Safe Zone and repeat step 2 at
different points of the Fence.
4. Move outside of the Fence Boundary and check if the collar stops
emitting stimulation.
NOTE - Keep transmitter and collar unit apart for more accurate readings.
CAUTION - Use Fence training manual before using this unit.
WARNING - Always deactivate the fence from the handheld unit
when not in use to prevent accidental stimulation.
To Next Page
Loading...