DAP-1325 N300 Wi-Fi Range Extender
User Manual
Configuring via Web-based Interface
Conguration
On the System / Configuration page, you can change the password for the administrator account
used to access the web-based interface of the extender and to access the device settings via
TELNET, restore the factory defaults, backup the current configuration, restore the extender's
configuration from a previously created file, save the changed settings to the non-volatile memory,
reboot the device, or change the web-based interface language.
Figure 61. The System / Configuration page.
In order to change the password for the administrator account, in the User section, enter a new
password in the Password and Password confirmation fields. Use digits, Latin letters
(uppercase and/or lowercase), and other characters available in the US keyboard layout.
4
Then click
the SAVE button.
!
Remember or write down the new password for the administrator account. In case of losing
the new password, you can access the settings of the extender only after restoring the
factory default settings via the hardware RESET button. This procedure wipes out all
settings that you have configured for your extender .
To change the web-based interface language, select the needed value from the Language drop-
down list.
4 0-9, A-Z, a-z, space, !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~.
Page 77 of 92
To Next Page
Loading...
