DAP-1325 N300 Wi-Fi Range Extender
User Manual
Configuring via Web-based Interface
Traceroute
On the System / Traceroute page, you can determine the route of data transfer to a host via the
traceroute utility.
Figure 65. The System / Traceroute page.
To determine the route, enter the name or IP address of a host in the Host field. If the route should
be determined using IPv6, move the IPv6 switch to the right. Click the START button. After a
while, the results will be displayed on the page.
To remove the check result from the page, click the CLEAR button.
Page 85 of 92
To Next Page
Loading...
