DAP-1360U Wireless N300 Access Point & Router
User Manual
Configuring via Web-based Interface
Advanced
In this menu you can configure advanced settings of the access point:
• create groups of ports for VLANs
• add name servers
• configure a DDNS service
• configure autonegotiation or manually configure speed and duplex mode for each Ethernet
port of the access point
• setup the rate limit for traffic transmitted from every port of the access point
• define static routes
• create rules for remote access to the web-based interface
• enable the UPnP IGD protocol
• allow the access point to use IGMP
• allow the access point to use RTSP, enable the SIP ALG, the PPPoE/PPTP/L2TP/IPsec pass
through functions for the access point.
Page 109 of 158
To Next Page
Loading...
