DAP-1360U Wireless N300 Access Point & Router
User Manual
Configuring via Web-based Interface
Remote Access
This page is available for the Router and WISP Repeater modes.
On the Advanced / Remote Access page, you can configure access to the web-based interface
of the access point. By default, the access from external networks to the access point is closed. If
you need to allow access to the access point from the external network, create relevant rules.
Figure 98. The Advanced / Remote Access page.
To create a new rule, click the ADD button ( ).
Figure 99. The window for adding a rule for remote management.
In the opened window, you can specify the following parameters:
Parameter Description
Open access from any
external host
Move the switch to the right to allow access to the access point for
any host. Upon that the IP address and Mask fields are not
displayed.
IP address
A host or a subnet to which the rule is applied.
Page 122 of 158
To Next Page
Loading...
