DAP-1360U Wireless N300 Access Point & Router
User Manual
Installation and Connection
Connecting to PC
PC with Ethernet Adapter
1. Connect an Ethernet cable between any of LAN ports located on the back panel of the
access point and the Ethernet port of your PC.
2. Connect the power cord to the power connector port on the back panel of the access point,
then plug the power adapter into an electrical outlet or power strip.
3. Turn on the access point by pressing the ON/OFF button on its back panel.
Now you need to configure an IP address for the Ethernet adapter of your PC.
Page 13 of 158
To Next Page
Loading...
