D-Link DAP-1360U

DAP-1360U Wireless N300 Access Point & Router
User Manual
Configuring via Web-based Interface
Firewall
This section is available for the Router and WISP Repeater modes.
In this menu you can configure the firewall of the access point:
• add rules for IP filtering
• create virtual servers
• define a DMZ
• configure the MAC filter
• specify restrictions on access to certain web sites.
IP Filter
On the Firewall / IP Filter page, you can create new rules for filtering IP packets and edit or
remove existing rules.
Figure 103. The Firewall / IP Filter page.
To create a new rule, click the ADD button ( ).
Page 128 of 158