DAP-1360U Wireless N300 Access Point & Router
User Manual
Installation and Connection
The Device Information section displays the model and hardware version of the access point, the
firmware version, and other data.
To contact the technical support group (to send an e-mail), left-click the support e-mail address.
After clicking the line, the e-mail client window for sending a new letter to the specified address
opens.
To change the operation mode of the device, left-click the name of the mode in the Device mode
line. In the opened window, click the initial setup wizard link (for the detailed description of the
Wizard, see the Initial Configuration Wizard section, page 30).
The Wi-Fi 2.4 GHz section displays data on the state of the device's wireless network, its name and
the authentication type, and availability of an additional wireless network.
In the WAN section, data on the type and status of the existing WAN connection are displayed.
In the WDS section, the MAC addresses of devices connected to the access point via the WDS
function are displayed.
In the LAN section, the IPv4 address of the access point and the number of wired and wireless
clients of the device are displayed.
The LAN Ports section displays the state of the device's LAN ports and data transfer mode of
active ports.
Page 26 of 158
To Next Page
Loading...
