DAP-1360U Wireless N300 Access Point & Router
User Manual
Configuring via Web-based Interface
Parameter Description
The MAC address of
this point in 2.4 GHz
The MAC address of the access point.
AP MAC
The MAC addresses of devices connected to the access point via the
WDS function.
To specify several MAC addresses, click the ADD button, and in the
line displayed, enter a MAC address.
To remove the MAC address, click the Delete icon ( ) in the line
of the address.
!
The WDS function parameters specified on the page must be the same for all
interconnected devices. In addition, it is required to set the same channel (on the Wi-Fi /
Basic settings page).
When you have configured the parameters, click the APPLY button.
Page 93 of 158
To Next Page
Loading...
