DAP-1360U Wireless N300 Access Point & Router
User Manual
Configuring via Web-based Interface
When the WPA-PSK, WPA2-PSK, or WPA-PSK/WPA2-PSK mixed authentication type is
selected, the following fields are displayed:
Parameter Description
Password PSK
A password for WPA encryption. Click the Show icon ( ) to
display the entered key.
Encryption type An encryption method: TKIP, AES, or TKIP+AES.
When you have configured the parameters, click the APPLY button.
When connecting to a wireless access point, the wireless channel of DAP-1360U will switch to the
channel of the access point to which you have connected.
In addition, the Connection Information section in which you can view the connection status
and the network basic parameters is displayed.
If you want to connect to the WISP network, after configuring the device as a client, you need to
create a WAN connection with relevant parameters for the WLAN interface.
Page 99 of 158
To Next Page
Loading...
