D-Link DCS-930L User Manual

17D-Link DCS-930L User Manual
Section 2 - Installation
Step 6
You will see the mydlink Live View for your camera. The screen will look similar to the screen
shot on the right.
Note: If you used an Ethernet connection and now want to connect your camera to your
router wirelessly, you can simply disconnect the Ethernet cable and move the camera to
the preferred location. Your router’s wireless settings were automatically transferred to the
camera during Zero Conguration Setup, so no further conguration is required.
If you are interested in learning about advanced conguration of your camera, you can
skip to “Conguration” on page 25.
Note: If you notice a white haze when viewing in night vision mode, the night vision light on
the camera may be reecting o a nearby surface. Try repositioning and aiming the camera.
DCS-930L
Step 5
A conrmation request will appear with a summary of the conguration details. Make a
note of the details and click Yes to add the camera to your account. Your setup is complete!

D-Link DCS-930L Specifications

General

Maximum resolution	640 x 480 pixels
White balance	Auto
Minimum illumination	1 lx
Sensor type	CMOS
Optical sensor size	1/5 \
Digital zoom	4 x
Security algorithms	WEP, WPA, WPA2
Video motion detection	Yes
Cabling technology	10/100Base-T(X)
Supported network protocols	IPV4, ARP, TCP, UDP, ICMP, DHCP, NTP, DNS, DONS, SMTP, FTP, HTTP, PPPoE, UPnP, LLTD
AC input voltage	100-240 V
DC output current	1.2 A
DC output voltage	+5V
AC input frequency	50 - 60 Hz
Power over Ethernet (PoE)	-
Power consumption (typical)	2 W
Ethernet LAN (RJ-45) ports	1
Certification	FCC B, IC, C-Tick, CE
Placement supported	Indoor
Dimensions (WxDxH)	27.2 x 60 x 96 mm
Compatible operating systems	Windows XP / Vista / 7
Flash memory	4 MB
Internal memory	32 MB
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	20 - 80 %
Form factor	Cube

Weight and Dimensions

Weight	76.9 g