EasyManuals Logo

D-Link DCS-930L User Manual

D-Link DCS-930L
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
40D-Link DCS-930L User Manual
Section 4 - Conguration
FTP
Host Name:
Port:
User Name:
Password:
Path:
Passive Mode:
Enable uploading
of images to an
FTP server:
Image
Frequency:
This is the IP address of the FTP server that you will be connecting to.
Default is port 21. If changed, external FTP client program must change the
server connection port accordingly.
Species the user name to access the external FTP server. If you are to upload
snapshots to an FTP server you will need to ll in the Domain name or IP address
of your external FTP server. The following user settings must be correctly
congured for remote access.
Species the password to access the external FTP server.
Species the destination folder in the external FTP server.
Enabling passive mode will allow access to an external FTP server if your camera
is behind a router protected by a rewall.
Check to enable this option allowing snapshots to be uploaded to the FTP server
using the settings entered above.
Choosing Always will continuously upload snapshots to the FTP server,
beginning right away.
Choosing Schedule will allow you to select a schedule for when to start and
stop the uploading of snapshots.
Select Motion/Sound Detection if you would like to upload snapshots only
when motion or sound is detected.
Select the rate at which you want the camera to take snapshots. The user can
dene both Frames/Second and Seconds/Frame.
If Always is selected, snapshots will be continuously uploaded according to
the selected image frequency.
If Schedule is selected, snapshots will be uploaded according to this image
frequency during the days and times specied in the schedule.
If Motion/Sound Detection is selected, snapshots will be uploaded
according to this image frequency while motion or sound is being detected.
This section allows you to congure the camera to send snapshots to an FTP server.

Other manuals for D-Link DCS-930L

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DCS-930L and is the answer not in the manual?

D-Link DCS-930L Specifications

General IconGeneral
Maximum resolution640 x 480 pixels
White balanceAuto
Minimum illumination1 lx
Sensor typeCMOS
Optical sensor size1/5 \
Digital zoom4 x
Security algorithmsWEP, WPA, WPA2
Video motion detectionYes
Cabling technology10/100Base-T(X)
Supported network protocolsIPV4, ARP, TCP, UDP, ICMP, DHCP, NTP, DNS, DONS, SMTP, FTP, HTTP, PPPoE, UPnP, LLTD
AC input voltage100-240 V
DC output current1.2 A
DC output voltage+5V
AC input frequency50 - 60 Hz
Power over Ethernet (PoE)-
Power consumption (typical)2 W
Ethernet LAN (RJ-45) ports1
CertificationFCC B, IC, C-Tick, CE
Placement supportedIndoor
Dimensions (WxDxH)27.2 x 60 x 96 mm
Compatible operating systemsWindows XP / Vista / 7
Flash memory4 MB
Internal memory32 MB
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)20 - 80 %
Form factorCube
Weight and Dimensions IconWeight and Dimensions
Weight76.9 g

Related product manuals