D-Link DCS-930L User Manual

42D-Link DCS-930L User Manual
Section 4 - Conguration
Time and Date
Current Time:
Time Zone:
Synchronize NTP
Server:
Daylight Saving:
Set the Date and
Time Manually:
Displays the current date and time.
Select the Time Zone for the location of your camera from the drop down menu.
Network Time Protocol will automatically synchronize your camera with an
Internet time server. Select an NTP Server from the drop-down menu that is
closest to the location of your camera.
If your region uses Daylight Saving Time (DST), you can click to enable DST here.
Select the oset (number of hours) from the drop-down menu. Select the start
and end dates and times for DST.
If Synchronize NTP Server is disabled, you can set the date and time manually.
Or you can simply click the Copy Your Computer’s Time Settings button to
automatically copy the date and time of the PC you are using.
Click Save Settings to save your settings.
This section allows you to congure the settings of the internal system clock for your camera.

D-Link DCS-930L Specifications

General

Maximum resolution	640 x 480 pixels
White balance	Auto
Minimum illumination	1 lx
Sensor type	CMOS
Optical sensor size	1/5 \
Digital zoom	4 x
Security algorithms	WEP, WPA, WPA2
Video motion detection	Yes
Cabling technology	10/100Base-T(X)
Supported network protocols	IPV4, ARP, TCP, UDP, ICMP, DHCP, NTP, DNS, DONS, SMTP, FTP, HTTP, PPPoE, UPnP, LLTD
AC input voltage	100-240 V
DC output current	1.2 A
DC output voltage	+5V
AC input frequency	50 - 60 Hz
Power over Ethernet (PoE)	-
Power consumption (typical)	2 W
Ethernet LAN (RJ-45) ports	1
Certification	FCC B, IC, C-Tick, CE
Placement supported	Indoor
Dimensions (WxDxH)	27.2 x 60 x 96 mm
Compatible operating systems	Windows XP / Vista / 7
Flash memory	4 MB
Internal memory	32 MB
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	20 - 80 %
Form factor	Cube

Weight and Dimensions

Weight	76.9 g