D-Link DCS-930L User Manual

41D-Link DCS-930L User Manual
Section 4 - Conguration
Base File Name:
Test FTP Server:
Enter the base name to be used when creating the le name of a snapshot.
• Selecting Overwrite will create a new snapshot by overwriting the existing
one, which is useful if you only want to keep the most recent snapshot.
• Selecting Date/Time Sux will create new snapshots each time by adding
the date and time after the base le name you enter. You can also choose to
use the Create subfolder by option to organize your snapshots in dierent
folders based on the time interval you select.
• Selecting Sequence Number Sux Up to will create new snapshots each
time by adding a number after the base le name, up to the number you
specify.
This will send a test le in JPEG format to the FTP server using the settings
specied above.
Click Save Settings to save your settings.

D-Link DCS-930L Specifications

General

Maximum resolution	640 x 480 pixels
White balance	Auto
Minimum illumination	1 lx
Sensor type	CMOS
Optical sensor size	1/5 \
Digital zoom	4 x
Security algorithms	WEP, WPA, WPA2
Video motion detection	Yes
Cabling technology	10/100Base-T(X)
Supported network protocols	IPV4, ARP, TCP, UDP, ICMP, DHCP, NTP, DNS, DONS, SMTP, FTP, HTTP, PPPoE, UPnP, LLTD
AC input voltage	100-240 V
DC output current	1.2 A
DC output voltage	+5V
AC input frequency	50 - 60 Hz
Power over Ethernet (PoE)	-
Power consumption (typical)	2 W
Ethernet LAN (RJ-45) ports	1
Certification	FCC B, IC, C-Tick, CE
Placement supported	Indoor
Dimensions (WxDxH)	27.2 x 60 x 96 mm
Compatible operating systems	Windows XP / Vista / 7
Flash memory	4 MB
Internal memory	32 MB
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	20 - 80 %
Form factor	Cube

Weight and Dimensions

Weight	76.9 g