EasyManuals Logo

D-Link DCS-930L User Manual

D-Link DCS-930L
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #64 background imageLoading...
Page #64 background image
64D-Link DCS-930L User Manual
Appendix B - Networking Basics
Statically Assign an IP Address
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
Windows®
8 Users
Press the Windows key and then type IP. Click Settings on the right side and then click View Network Connections.
Right-click on the adapter which represents your D-Link wireless network adapter.
• Highlight Internet Protocol Version 4 (TCP /IPv4) and click Properties.
• Click Use the following IP address and enter an IP address that is on the
same subnet as your network or LAN IP address on your router or network.
Example: If the routers LAN IP address is 192.168.0.1, make your IP address
192.168.0.X where X is a number between 2 and 99. Make sure that the
number you choose is not in use on the network.
• Set Default Gateway the same as the LAN IP address of your router or
gateway.
• Set Primary DNS the same as the LAN IP address of your router or gateway.
• The Secondary DNS is optional (you may enter a DNS server from your
ISP).
• Click OK to save your settings.

Other manuals for D-Link DCS-930L

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DCS-930L and is the answer not in the manual?

D-Link DCS-930L Specifications

General IconGeneral
Maximum resolution640 x 480 pixels
White balanceAuto
Minimum illumination1 lx
Sensor typeCMOS
Optical sensor size1/5 \
Digital zoom4 x
Security algorithmsWEP, WPA, WPA2
Video motion detectionYes
Cabling technology10/100Base-T(X)
Supported network protocolsIPV4, ARP, TCP, UDP, ICMP, DHCP, NTP, DNS, DONS, SMTP, FTP, HTTP, PPPoE, UPnP, LLTD
AC input voltage100-240 V
DC output current1.2 A
DC output voltage+5V
AC input frequency50 - 60 Hz
Power over Ethernet (PoE)-
Power consumption (typical)2 W
Ethernet LAN (RJ-45) ports1
CertificationFCC B, IC, C-Tick, CE
Placement supportedIndoor
Dimensions (WxDxH)27.2 x 60 x 96 mm
Compatible operating systemsWindows XP / Vista / 7
Flash memory4 MB
Internal memory32 MB
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)20 - 80 %
Form factorCube
Weight and Dimensions IconWeight and Dimensions
Weight76.9 g

Related product manuals